CÔTE D’IVOIRE IS TURNING GOLD EXPLORATION INTO A DRILLING MARATHON — AND THE NUMBERS ARE GETTING RIDICULOUS 🇨🇮⛏️

375,000 metres of drilling.
Not 37,500 metres.
More than 375 kilometres of drilling since a 2024 feasibility study.
That is what Montage Gold has reported at its Koné gold operation in Côte d’Ivoire.
And if you want to understand why West Africa remains one of the most exciting gold exploration regions on the planet, those numbers are a pretty good place to start.
Because something interesting is happening in Côte d’Ivoire.
Gold mines are being developed.
New targets are being tested.
Existing deposits are being extended.
Exploration programmes are becoming enormous.
And companies are discovering that the original resource estimate may be only the beginning of the story.
For the drilling industry, that creates a very simple opportunity.
More targets. More holes. More metres. More demand for equipment that actually works.
Welcome to Côte d’Ivoire.

CÔTE D’IVOIRE IS NO LONGER JUST ANOTHER WEST AFRICAN GOLD PROSPECT
When people talk about African gold mining, a few countries usually dominate the conversation.
Ghana.
Mali.
Burkina Faso.
Guinea.
And increasingly, Côte d’Ivoire.
The country sits within the West African Craton, one of the world's major gold-producing geological regions.
More specifically, much of its gold potential is associated with the Birimian geological terranes that extend across several West African countries.
These rocks have hosted major gold discoveries for decades.
And they are still delivering.
But the interesting part is not simply that Côte d’Ivoire contains gold.
It is the combination of geology, investment, active exploration and mine development.
That combination creates demand for drilling on a completely different scale.
THE KONÉ GOLD PROJECT IS A PERFECT EXAMPLE
In November 2026, Montage Gold released an update on exploration and operations at its Koné mine.
The company reported its first gold pour on 26 September 2026.
By October, its oxide processing circuit was ramping up, and commercial production was targeted for the fourth quarter.
But the drilling figures are what really caught our attention.
Since its 2024 feasibility study, the company reported more than 375,000 metres of additional drilling.
Its 2026 exploration programme alone was budgeted at approximately 130,000 metres.
And the exploration results were changing the geological picture.
At the feasibility-study stage, the project had two delineated deposits.
By November 2026?
Twelve.
That is a remarkable illustration of what sustained exploration can achieve.
The original deposits established the project.
The continuing drilling programme is investigating how much bigger the mineralised system might become.
And that distinction matters enormously.
THE FIRST GOLD DISCOVERY IS NOT ALWAYS THE BIGGEST PRIZE
There is a common misconception about exploration.
Find a gold deposit.
Drill it.
Build a mine.
Finished.
Except that is not how successful mining districts necessarily develop.
The first discovery might establish the economic case.
Then geologists start looking around it.
Along strike.
Down dip.
Under cover.
Between known zones.
Around structural intersections.
Along parallel mineralised trends.
Suddenly the original discovery becomes one part of a much larger geological system.
And that is exactly why drilling continues after a project has moved into development or production.
A mine needs to replace the ounces it produces.
It wants to extend its operating life.
It wants higher-grade material.
It wants flexibility in the mine schedule.
It wants to discover nearby deposits that could use existing processing infrastructure.
Exploration does not stop when the first gold bar comes out.
In many cases, that is when the next exploration campaign becomes even more commercially important.
4,245 DRILL HOLES IN NINE MONTHS
Now for the number that drilling contractors should pay attention to.
Montage reported 4,245 holes drilled during the first nine months of 2026 at Koné.
Together, those holes totalled 122,651 metres.
And the breakdown tells us something important.
Drilling method | Holes | Metres |
Reverse circulation (RC) | 747 | 86,076 |
Diamond drilling | 64 | 11,064 |
Auger drilling | 3,434 | 25,511 |
Total | 4,245 | 122,651 |
Those are not hypothetical equipment requirements.
Those are reported metres actually drilled.
And they demonstrate why successful gold exploration programmes rarely depend on just one drilling method.
Auger finds the clues. RC tests the targets. Diamond drilling helps explain the geology.
Each method has a different job.
Each creates value at a different stage.
And using them intelligently is one of the most effective ways to control exploration costs.
AUGER DRILLING: THE QUIET WORKHORSE
Auger drilling rarely gets the attention of a spectacular diamond core photograph.
But in the right geological environment, it can be extremely useful.
Particularly when exploration teams are trying to understand shallow weathered material and geochemical patterns.
In West Africa, deeply weathered profiles and transported cover can complicate surface exploration.
Systematic shallow sampling can help geologists distinguish background geochemistry from potentially meaningful anomalies.
At Koné, the reported programme included more than 25,000 metres of auger drilling.
That is a substantial reconnaissance effort.
And it illustrates an important point.
You do not need to drill every early-stage target with a large diamond rig.
You need to choose the method that answers the geological question efficiently.
The real skill is knowing when to move from inexpensive reconnaissance to more detailed drilling.
RC DRILLING: WHERE THE METRES START GETTING SERIOUS
More than 86,000 metres of RC drilling in nine months.
Now we are talking.
Reverse circulation drilling is particularly valuable for many gold exploration programmes because it can deliver relatively rapid penetration and representative chip samples when operated correctly in suitable ground.
It is commonly used for:
Testing gold targets identified through geochemistry and geophysics.
Following mineralised trends.
Defining near-surface and moderately deep mineralisation.
Infill and step-out drilling.
Supporting resource development.
But there is a catch.
An RC rig is only as useful as the compressor, drill string, sampling system and maintenance support behind it.
A machine might look impressive on a specification sheet.
That does not mean it will produce consistent metres in difficult ground.
The compressor needs sufficient pressure and airflow for the hole diameter, depth and conditions.
The hammer and bit need to match the application.
The cyclone and splitter need to produce reliable samples.
The inner tubes, outer rods and connections need to work together.
And the drilling crew needs to know what to do when conditions change.
Because poor sampling can undermine the value of an otherwise successful drilling programme.
Fast metres mean very little if the sample quality is rubbish.

DIAMOND DRILLING: WHEN GEOLOGISTS NEED THE WHOLE STORY
RC chips can provide valuable geological and assay information.
But there are times when the actual rock structure matters enormously.
That is where diamond drilling comes in.
At Koné, the first nine months of 2026 included more than 11,000 metres of diamond drilling.
Diamond core allows geologists to investigate:
Rock types and geological contacts.
Veining and alteration.
Structural orientation.
Faults and shear zones.
Mineralisation continuity.
Geotechnical conditions.
Detailed geological relationships.
This information becomes particularly important when mineralised systems are structurally complex.
And gold deposits often are.
A few metres of core can reveal information that completely changes the geological interpretation.
That can influence where the next hole goes.
Which is why a well-planned diamond drilling programme is not simply about recovering rock.
It is about reducing geological uncertainty.
THE REAL STORY IS THE COMBINATION
This is where we believe modern exploration programmes get interesting.
A company might begin with surface mapping and geochemistry.
Then shallow auger sampling.
Then RC drilling.
Then diamond drilling.
Then additional infill and extension holes.
The sequence is not identical for every project.
But the principle is consistent.
Use the right tool for the right geological question.
And do not waste an expensive drilling programme answering questions that a cheaper method could have resolved earlier.
At Cylinder Exploration Drilling, this is precisely why we focus on complete exploration equipment packages rather than a single type of rig.
Different stages of exploration demand different capabilities.
The equipment should follow the geology.
Not the other way around.
WHY CÔTE D’IVOIRE IS ATTRACTING ATTENTION
The appeal of Côte d’Ivoire is not difficult to understand.
It has prospective geology.
An established mining sector.
Active gold producers.
Developing projects.
Exploration licences.
And access to a wider West African mining services ecosystem.
The country also benefits from being part of a mineral belt that has already delivered major gold operations across national borders.
But none of that guarantees discovery.
A prospective geological belt is not the same as a proven economic deposit.
That is where exploration capital and drilling come in.
The more effectively companies can convert geological ideas into reliable drilling results, the better their chances of identifying commercially meaningful deposits.
And as the number of active programmes increases, equipment availability and operational support become increasingly important.
WEST AFRICAN DRILLING IS NOT A WALK IN THE PARK
Anyone who has worked in remote exploration understands this.
The ground is only one part of the challenge.
In Côte d’Ivoire, programmes can encounter difficult access, seasonal rainfall, weathered formations, variable groundwater conditions and long supply routes.
Conditions vary considerably between projects.
But the underlying operational problems are familiar.
A rig breaks down.
A compressor loses performance.
A hydraulic hose fails.
A bit is wrong for the formation.
A shipment gets delayed.
A crew arrives without the correct tooling.
Suddenly a drilling programme with an expensive support structure is sitting still.
The geologists are waiting.
The camp is still running.
The vehicles are still costing money.
And not a single new metre is being drilled.
Downtime is where cheap equipment becomes very expensive.
A DRILL RIG WITHOUT CONSUMABLES IS AN EXPENSIVE ORNAMENT
We say this frequently at CED because it is true.
The rig is only part of the package.
A serious RC programme needs the correct drill string, hammers, bits, adaptors, sampling equipment, compressors, injection systems, hoses and critical spares.
A diamond drilling programme needs rods, core barrels, inner tubes, overshots, bits, reamers, casing, drilling fluids, pumps and reliable wireline equipment.
Then you need maintenance.
Then logistics.
Then personnel.
Then a plan for the components that will inevitably wear or fail.
A project planning 50,000 or 100,000 metres should not be organising consumables as an afterthought.
It should be building its supply strategy before the first rig arrives.

THE COMPRESSOR CAN MAKE OR BREAK AN RC PROGRAMME
This deserves special attention.
Because when people compare RC rigs, they often concentrate on the rig itself.
Pullback.
Feed.
Rotation.
Depth rating.
All important.
But the compressor is equally critical to the complete drilling system.
Available airflow and operating pressure affect hole cleaning and hammer performance.
The correct compressor specification depends on the drilling diameter, target depth, formation, groundwater and chosen downhole equipment.
A compressor that is poorly matched to the application can compromise penetration rates and drilling performance.
And if you are planning tens of thousands of metres, small performance losses become significant.
That is why CED treats the RC rig and compressor as a matched system.
Not two unrelated purchases.
WHAT DOES A 100,000-METRE PROGRAMME ACTUALLY REQUIRE?
It requires considerably more than a purchase order for drilling equipment.
It requires operational planning.
How many rigs?
How many shifts?
What drilling method?
What is the realistic production rate?
What is the expected ground condition?
How much rod capacity is needed?
How many consumables should be available onsite?
What is the critical-spares inventory?
Who is maintaining the machines?
Where will replacement components come from?
What happens if a rig is down for five days?
And perhaps most importantly:
Who is responsible for keeping the whole operation moving?
The answers will vary between projects.
But these questions should be answered before mobilisation.
Not halfway through the programme.
CED'S APPROACH: COMPLETE DRILLING CAPABILITY
At Cylinder Exploration Drilling, we are building our business around exactly these requirements.
We manufacture and supply equipment for mineral exploration, including:
CEDRC450 RC drilling systems for reverse circulation programmes, configured with suitable compressors and supporting equipment.
CED diamond drilling rigs, from compact man-portable systems through to larger surface machines.
CED Air Core drilling equipment for suitable shallow exploration applications.
CED SFM7300 mobile RC, Air Core and Auger systems for projects requiring flexibility and mobility.
CED SFM7200 diamond drilling systems for mobile core drilling applications.
And the equipment that keeps everything running.
Compressors.
Mud pumps.
Drill rods.
Bits.
Core barrels.
Drilling fluids.
Consumables.
Critical spares.
Support trailers.
But our offering does not stop with equipment.
CED can also support projects with experienced drillers, mechanical fitters, supervisors, commissioning, training and drilling programme management.
Because a client may want to own the rig without building an entire drilling organisation around it.
Or they may need a complete operating solution.
Both are valid models.
The important part is matching the commercial and operational structure to the project.
WHY MOBILE EXPLORATION EQUIPMENT MATTERS
One of the challenges in large exploration programmes is moving between targets.
A rig that spends too much time being transported, assembled and repositioned is not producing metres.
For suitable projects, mobile and modular systems can help reduce some of that lost time.
That is one reason CED has developed its SFM series around mobile drilling and support configurations.
The SFM7300 is designed around RC, Air Core and Auger capability.
The SFM7200 targets diamond drilling applications.
The SFMTS support trailer concept is intended to help organise the equipment and consumables required around the rig.
These are not universal replacements for conventional drilling fleets.
Different terrain, hole specifications and project requirements call for different machines.
But where mobility is commercially important, the right equipment configuration can make a meaningful difference.
THE BIGGEST GOLD DISCOVERIES OF TOMORROW MAY BE BESIDE TODAY'S MINES
This is perhaps the most important lesson from the Koné exploration story.
A mining project can begin with a small number of known deposits.
Then continued exploration identifies additional targets.
Some targets fail.
Others develop into resources.
Some may become satellite deposits capable of supplying an existing processing plant.
That is potentially powerful.
Because the value of a nearby discovery can be influenced by infrastructure that already exists.
Roads.
Power.
Processing facilities.
Camp.
Workshops.
Logistics.
It is one reason exploration around established mining districts can remain commercially attractive.
But identifying those additional deposits still requires geological work and drilling.
A processing plant cannot turn an untested geophysical anomaly into gold.
375 KILOMETRES OF DRILLING SENDS A MESSAGE
The scale of drilling at Koné illustrates how much work can sit behind a modern gold operation.
Thousands of holes.
Multiple drilling methods.
Numerous targets.
Geological interpretation.
Resource updates.
Mine planning.
And a continuing search for additional mineralisation.
Not every exploration programme will operate at that scale.
Most will be considerably smaller.
But the lesson applies whether a company is drilling 2,000 metres or 200,000 metres.
Every metre needs a purpose.
And every drilling system needs to be capable of delivering it.
CÔTE D’IVOIRE COULD BECOME AN EVEN BIGGER DRILLING MARKET
There is no guarantee that every exploration licence will become a mine.
Most will not.
That is the reality of mineral exploration.
But successful projects can attract further investment, strengthen local services and encourage exploration across surrounding geological belts.
As Côte d’Ivoire continues to develop its gold sector, demand for reliable RC drilling, diamond drilling, consumables, compressors and experienced personnel could grow alongside it.
For CED, that makes the country an important market to watch.
Not just for selling machines.
But for supporting complete exploration programmes.
Because a successful drilling operation is not measured by how impressive the equipment looks when it arrives.
It is measured by what it delivers.
Metres.
Samples.
Core.
Geological information.
And ultimately, discoveries.
THE GOLD IS UNDERGROUND. THE OPPORTUNITY IS IN THE DRILLING.
Côte d’Ivoire has the geology.
It has operating mines.
It has exploration investment.
And it has companies committing serious money to understanding what lies beneath their licences.
The Koné drilling figures show what happens when exploration becomes a sustained, systematic campaign.
More than 375 kilometres of drilling since the 2024 feasibility study.
Thousands of holes.
Multiple drilling methods.
A growing inventory of delineated deposits.
That is not a small exploration programme.
That is a drilling marathon.
And it reinforces something we believe strongly at Cylinder Exploration Drilling:
Before there is a mine, there has to be a discovery.
And someone has to drill it.
THE QUESTION
With Côte d’Ivoire attracting increasing gold exploration investment, will the next major discovery come from an entirely new gold district, or from drilling deeper and wider around deposits companies already know exist?
Cylinder Exploration Drilling | Diamond Drilling | RC | Air Core | Drilling Rigs | Consumables | Complete Exploration Solutions
Explore CED equipment and drilling services at www.cylinder-ed.com.





Comments